Symbol-technologies P470 Bedienungsanleitung

P470/P370 RF ScannerProduct Reference Guide

viiiP470/370 RF Scanner Product Reference Guide

5-30P470/370 RF Scanner Product Reference GuideEnable/Disable Bookland EANScan the appropriate bar code below to enable or disable Bookland EAN.ENABLE

5-31Parameter MenusDecode UPC/EAN SupplementalsSupplementals are characters (either 2 or 5) that are added on according to specific code format conven

5-32P470/370 RF Scanner Product Reference GuideDecode UPC/EAN Supplemental RedundancyWith Autodiscriminate UPC/EAN Supplementals selected, this option

5-33Parameter MenusTransmit UPC-A/UPC-E/UPC-E1 Check DigitScan the appropriate bar code below to transmit the symbol with or without the UPC-A, UPC-E,

5-34P470/370 RF Scanner Product Reference GuideUPC-A PreambleThree options are given for lead-in characters for UPC-A symbols transmitted to the host

5-35Parameter MenusUPC-E PreambleThree options are given for lead-in characters for UPC-E symbols transmitted to the host device: Transmit system char

5-36P470/370 RF Scanner Product Reference GuideUPC-E1 PreambleThree options are given for lead-in characters for UPC-E1 symbols transmitted to the hos

5-37Parameter MenusConvert UPC-E to UPC-AThis parameter converts UPC-E (zero suppressed) decoded data to UPC-A format before transmission. After conve

5-38P470/370 RF Scanner Product Reference GuideConvert UPC-E1 to UPC-AThis parameter converts UPC-E1 decoded data to UPC-A format before transmission.

5-39Parameter MenusEAN-8 Zero ExtendIf this parameter is enabled, five leading zeros are added to decoded EAN-8 symbols to make them compatible in for

ixAbout This ManualIntroductionThe P470/P370 RF Scanners Product Reference Guide provides general instructions for setup, operation, troubleshooting,

5-40P470/370 RF Scanner Product Reference GuideConvert EAN-8 to EAN-13 TypeWhen EAN Zero Extend is enabled, this parameter gives you the option of lab

5-41Parameter MenusUPC/EAN Security LevelThe scanner offers four levels of decode security for UPC/EAN bar codes. Increasing levels of security are pr

5-42P470/370 RF Scanner Product Reference GuideUPC/EAN Security Level (Continued)UPC/EAN Security Level 2If you are experiencing mis-decodes of poorly

5-43Parameter MenusUPC/EAN Coupon CodeWhen this parameter is enabled, the scanner decodes UPC-A, UPC-A with 2 supplemental characters, UPC-A with 5 su

5-44P470/370 RF Scanner Product Reference GuideEnable/Disable Code 128Scan the appropriate bar code below to enable or disable Code 128.*ENABLE CODE 1

5-45Parameter MenusEnable/Disable UCC/EAN-128Scan the appropriate bar code below to enable or disable UCC/EAN-128. (See Appendix A, Bar Code Informati

5-46P470/370 RF Scanner Product Reference GuideLengths for Code 128 No length setting is required for Code 128. The default setting is Any Length.

5-47Parameter MenusEnable/Disable ISBT 128 To enable or disable ISBT 128, scan the appropriate bar code below.*Enable ISBT 128Disable ISBT 128

5-48P470/370 RF Scanner Product Reference GuideEnable/Disable Code 39Scan the appropriate bar code below to enable or disable Code 39.*ENABLE CODE 39D

5-49Parameter MenusEnable/Disable Trioptic Code 39Trioptic Code 39 symbols always contain six characters. Trioptic Code 39 and Code 39 Full ASCII cann

xP470/370 RF Scanner Product Reference Guide• Italics are used to highlight specific items in the general text, and to identify chapters and sections

5-50P470/370 RF Scanner Product Reference GuideSet Lengths for Code 39Lengths for Code 39 may be set for any length, one or two discrete lengths, or l

5-51Parameter MenusSet Lengths for Code 39 (Continued)Length Within Range - This option allows you to decode a code type within a specified range. For

5-52P470/370 RF Scanner Product Reference GuideCode 39 Check Digit VerificationWhen enabled, this parameter checks the integrity of a Code 39 symbol t

5-53Parameter MenusTransmit Code 39 Check DigitScan the appropriate bar code below to transmit the data with or without the check digit.TRANSMIT CODE

5-54P470/370 RF Scanner Product Reference GuideEnable/Disable Code 39 Full ASCIIScan the appropriate bar code below to enable or disable Code 39 Full

5-55Parameter MenusConvert Code 39 to Code 32Scan the appropriate bar code below to enable or disable converting Code 39 to Code 32.Note:Code 39 must

5-56P470/370 RF Scanner Product Reference GuideCode 32 PrefixScan the appropriate bar code below to enable or disable the prefix character “A” to all

5-57Parameter MenusEnable/Disable Code 93Scan the appropriate bar code below to enable or disable Code 93.ENABLE CODE 93*DISABLE CODE 93

5-58P470/370 RF Scanner Product Reference GuideSet Lengths for Code 93Lengths for Code 93 may be set for any length, one or two discrete lengths, or l

5-59Parameter MenusSet Lengths for Code 93 (Continued)Length Within Range - This option allows you to decode a code type within a specified range. For

xiAbout This GuideSymbol Support CenterFor service information, warranty information or technical assistance contact or call the Symbol Support Center

5-60P470/370 RF Scanner Product Reference GuideEnable/Disable Interleaved 2 of 5Scan the appropriate bar code below to enable or disable Interleaved 2

5-61Parameter MenusSet Lengths for Interleaved 2 of 5 Lengths for I 2 of 5 may be set for any length, one or two discrete lengths, or lengths within a

5-62P470/370 RF Scanner Product Reference GuideSet Lengths for Interleaved 2 of 5 (Continued)Length Within Range - This option allows you to decode a

5-63Parameter MenusI 2 of 5 Check Digit VerificationWhen enabled, this parameter checks the integrity of an I 2 of 5 symbol to ensure it complies with

5-64P470/370 RF Scanner Product Reference GuideTransmit I 2 of 5 Check DigitScan the appropriate bar code below to transmit the data with or without t

5-65Parameter MenusConvert I 2 of 5 to EAN-13This parameter converts a 14 character I 2 of 5 code into EAN-13, and transmits to the host as EAN-13. In

5-66P470/370 RF Scanner Product Reference GuideEnable/Disable Discrete 2 of 5Scan the appropriate bar code below to enable or disable Discrete 2 of 5.

5-67Parameter MenusSet Lengths for Discrete 2 of 5 Lengths for D 2 of 5 may be set for any length, one or two discrete lengths, or lengths within a sp

5-68P470/370 RF Scanner Product Reference GuideSet Lengths for Discrete 2 of 5 (Continued)Length Within Range - This option allows you to decode a cod

5-69Parameter MenusEnable/Disable CodabarScan the appropriate bar code below to enable or disable Codabar.ENABLE CODABAR*DISABLE CODABAR

xiiP470/370 RF Scanner Product Reference GuideGermany/DeutchlandSymbol Technologies GmbHWaldstrasse 66D-63128 Dietzenbach, GermanyTel: 6074-49020 (Ins

5-70P470/370 RF Scanner Product Reference GuideSet Lengths for CodabarLengths for Codabar may be set for any length, one or two discrete lengths, or l

5-71Parameter MenusSet Lengths for Codabar (Continued)Length Within Range - This option allows you to decode a code type within a specified range. For

5-72P470/370 RF Scanner Product Reference GuideCLSI EditingIf enabled, this parameter strips the start and stop characters and inserts a space after t

5-73Parameter MenusNOTIS EditingIf enabled, this parameter strips the start and stop characters from a decoded Codabar symbol.ENABLE NOTIS EDITING*DIS

5-74P470/370 RF Scanner Product Reference GuideEnable/Disable MSI PlesseyScan the appropriate bar code below to enable or disable MSI Plessey.ENABLE M

5-75Parameter MenusSet Lengths for MSI Plessey Lengths for MSI Plessey may be set for any length, one or two discrete lengths, or lengths within a spe

5-76P470/370 RF Scanner Product Reference GuideSet Lengths for MSI Plessey (Continued)Length Within Range - This option allows you to decode a code ty

5-77Parameter MenusMSI Plessey Check DigitsThese check digits at the end of the bar code verify the integrity of the data. At least one check digit is

5-78P470/370 RF Scanner Product Reference GuideTransmit MSI Plessey Check DigitScan the appropriate bar code below to transmit the data with or withou

5-79Parameter MenusMSI Plessey Check Digit AlgorithmWhen the two MSI Plessey check digits option is selected, an additional verification is required t

xiiiAbout This GuideIf you purchased your Symbol product from a Symbol Business Partner, contact that Business Partner for service.For the latest vers

5-80P470/370 RF Scanner Product Reference GuideTransmit Code ID CharacterA code ID character identifies the code type of a scanned bar code. This may

5-81Parameter MenusTransmit Code ID Character (Continued)SYMBOL CODE ID CHARACTERAIM CODE ID CHARACTER*NONE

5-82P470/370 RF Scanner Product Reference GuidePause DurationThis parameter allows a pause to be inserted at any point in the data transmission. Pause

5-83Parameter MenusRS-232C ParametersBaud RateBaud rate is the number of bits of data transmitted per second. The scanner's baud rate setting sho

5-84P470/370 RF Scanner Product Reference GuideBaud Rate (Continued)BAUD RATE 4800*BAUD RATE 9600BAUD RATE 19,200BAUD RATE 38,400

5-85Parameter MenusParityA parity check bit is the most significant bit of each ASCII coded character. Select the parity type according to host device

5-86P470/370 RF Scanner Product Reference GuideParity (Continued)Select MARK parity and the parity bit is always 1.MARKSelect SPACE parity and the par

5-87Parameter MenusCheck Receive ErrorsSelect whether or not the parity, framing, and overrun of received characters are checked. The type of parity u

5-88P470/370 RF Scanner Product Reference GuideHardware HandshakingThe data interface consists of an RS-232C port. The port has been designed to opera

5-89Parameter MenusHardware Handshaking (Continued)Scan the bar code below if no Hardware Handshaking is desired.*NONEScan the bar code below to selec

xivP470/370 RF Scanner Product Reference Guide

5-90P470/370 RF Scanner Product Reference GuideHardware Handshaking (Continued)When Option 2 is selected, RTS is always high or low (user-programmed l

5-91Parameter MenusSoftware HandshakingThis parameter offers control of the data transmission process in addition to, or instead of, that offered by h

5-92P470/370 RF Scanner Product Reference GuideSoftware Handshaking (Continued)ENQWhen this option is selected, the cradle waits for an ENQ, Enquiry,

5-93Parameter MenusSoftware Handshaking (Continued)XON/XOFFAn XOFF, Transmit Off, character turns the scanner transmission off until the scanner recei

5-94P470/370 RF Scanner Product Reference GuideHost Serial Response Time-outThis parameter specifies how long the scanner waits for an ACK, NAK or CTS

5-95Parameter MenusStop Bit SelectThe stop bit(s) at the end of each transmitted character marks the end of transmission of one character and prepares

5-96P470/370 RF Scanner Product Reference GuideASCII FormatThis parameter allows the cradle to interface with devices requiring a 7-bit or 8-bit ASCII

5-97Parameter MenusMCL-Net ParametersMCL-Net Baud RateBaud rate is the number of bits of data transmitted per second. Scan the appropriate bar code be

5-98P470/370 RF Scanner Product Reference GuideMCL-Net Baud Rate (Continued)BAUD RATE 4800BAUD RATE 9600BAUD RATE 19200*BAUD RATE 38400

5-99Parameter MenusMCL-Net Hex Addressing ModeScan the appropriate bar code below to set the MCL-Net Hex addressing mode. The default mode is Disabled

1-1Chapter 1 The P470/P370 RF ScannerIntroductionThe P470/P370 cordless RF scanners bring new flexibility and economy to data capture and data manage

5-100P470/370 RF Scanner Product Reference GuideScanner AddressScan the following barcode, followed by 3 digits from the numeric barcode section (star

5-101Parameter MenusScanner Decode Beep TypeSelect the type of beep for the scanner. This parameter is useful when two or more systems are installed i

5-102P470/370 RF Scanner Product Reference GuideLong Range Scanning Bar CodesThe P370 ALR (Long Range) scanner has an aiming feature which allows the

5-103Parameter MenusOption 2: Trigger Release to ScanWhen you pull the trigger, the aiming dot will appear. The aiming dot remains present while the t

5-104P470/370 RF Scanner Product Reference GuideNumeric Bar CodesFor parameters requiring specific numeric values, scan the appropriately numbered bar

5-105Parameter MenusNumeric Bar Codes (Continued)56789

5-106P470/370 RF Scanner Product Reference GuideNumeric Bar Codes (Continued)CancelIf you make an error, or wish to change your selection, scan the ba

A-1Appendix ABar Code InformationUCC/EAN-128UCC/EAN-128 is a convention for printing data fields with standard Code 128 bar code symbols. UCC/EAN-128

A-2P470/370 RF Scanner Product Reference GuideTable A-1. Reading Standard Code128 & UCC/EAN 128Standard Code 128UCC/EAN-128 Effect and ExampleDisa

A-3Bar Code InformationAIM Code IdentifiersEach AIM Code Identifier contains the three-character string ]cm where:] = Flag Character (ASCII 93)c = Cod

1-2P470/370 RF Scanner Product Reference GuideRechargeable BatteryIn the handle of the scanner, there is a rechargeable lithium-ion battery. This prov

A-4P470/370 RF Scanner Product Reference GuideThe modifier character is the sum of the applicable option values based on the following table.Table A-3

A-5Bar Code InformationCodabar 0 No check digit processing.1 Reader has checked check digit.3 Reader has stripped check digit before transmission.Exam

A-6P470/370 RF Scanner Product Reference GuideAccording to AIM standards, a UPC with supplemental bar code is transmitted in one of the following form

A-7Bar Code InformationTable A-5. ASCII Character Set ASCIIValueFull ASCII Code 39 Encode Char.Keystroke ASCIIValueFull ASCII Code 39 Encode CharKeys

A-8P470/370 RF Scanner Product Reference GuideASCIIValueFull ASCII Code 39 Encode Char.Keystroke ASCIIValueFull ASCII Code 39 Encode CharKeystroke1048

A-9Bar Code InformationASCIIValueFull ASCII Code 39 Encode Char.Keystroke ASCIIValueFull ASCII Code 39 Encode CharKeystroke1098 +B b 1113 +Q q1099 +C

A-10P470/370 RF Scanner Product Reference GuideALT Keys Keystroke ALT Keys Keystroke ALT Keys Keystroke2064 ALT 2 2075 ALT K 2086 ALT V2065 ALT A 207

A-11Bar Code InformationPF Keys Keystroke PF Keys Keystroke PF Keys Keystroke4001 PF 1 4009 PF 9 4017 PF 174002 PF 2 4010 PF 10 4018 PF 184003 PF 3 40

A-12P470/370 RF Scanner Product Reference GuideNumericKeypadKeystroke NumericKeypadKeystroke NumericKeypadKeystroke6042 * 6049 1 6056 86043 + 6050 2 6

B-1Appendix BAutomatic Project DownloadThe Phaser P470/P370 RF scanner is shipped from the factory with a pre-installed default application. This ful

1-3The P470/P370 RF ScannerQuick Startup InstructionsBelow is an index of Quick Startup Instructions to help get you up and going quickly. These instr

B-2P470/370 RF Scanner Product Reference GuideNote that designer always appends the .prj suffix to the directories it creates to store project files.T

C-1Appendix CRadio ChannelsCordless Phaser RF Channels Per CountryThe cordless Phaser scanner operates continuously on a single, programmable channel

C-2P470/370 RF Scanner Product Reference GuideBOLIVIA82 2 83BRAZIL82 2 83CANADA82 2 83CHILE82 2 83COLOMBIA82 2 83COSTA RICA82 2 83CZECH REPUBLIC82 2 8

C-3Radio ChannelsLUXEMBOURG82 2 83MALAYSIA82 2 83MEXICO32 52 83NETHERLANDS82 2 83NEW ZEALAND82 2 83NICARAGUA82 2 83NORWAY82 2 83PERU82 2 83PHILIPPINES

C-4P470/370 RF Scanner Product Reference GuideUNITED KINGDOM82 2 83URUGUAY82 2 83UNITED STATES (US)82 2 83VENEZUELA82 2 83Table C-1. RF Channels Per C

D-1Appendix DMessages and Error CodesIntroductionThis Appendix contains information on messages and error codes displayed on the scanner.MessagesThe

D-2P470/370 RF Scanner Product Reference GuideCommunication Errors Scanning Transmission RangeA communication error will occur when the scanner, cradl

D-3Messages and Error Codes015 RF Communication ErrorScanner is out of range, not properly paired to a base or the base may have lost power.016 RF Com

D-4P470/370 RF Scanner Product Reference Guide

Index-1Numerics123Scan . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17AADF rules . . . . . . . . . . . . . . . . . . . . . . . . . 3-17AIM

1-4P470/370 RF Scanner Product Reference GuideCommonly Used P470/P370 Programming Bar CodeBelow are commonly used programming bar codes. You can cut t

Index-2P470/370 RF Scanner Product Reference GuideMSI plesseycheck digit algorithm . . . . . . . . . 5-79check digits . . . . . . . . . . . . . . .

Index-3IndexADF rules . . . . . . . . . . . . . . . . . . . . . . 3-17applications . . . . . . . . . . . . . . . . . . . . . 3-9automatic upgrade pro

Index-4P470/370 RF Scanner Product Reference Guidetable of default settings . . . . . . . . . . . . 5-2pause duration . . . . . . . . . . . . . . .

Index-5IndexSet Contrast . . . . . . . . . . . . . . . . . . . . . 3-8set default application . . . . . . . . . . . . 3-10Set Default Params . . . .

Index-6P470/370 RF Scanner Product Reference Guide

Thank you for your input—We value your comments.Tell Us What You Think...We’d like to know what you think about this Manual. Please take a moment to f

Quick Startup InstructionsBelow is an index of Quick Startup Instructions to help get you up and going quickly. The index is listed in a step by step

2-1Chapter 2 Set UpIntroductionThis chapter covers the procedures for setting up the RF scanner and its accessories.Unpacking Remove the scanner from

2-2P470/370 RF Scanner Product Reference GuideThere are two basic host communications options available:• using an RS-232 cable• using a Synapse cable

2-3Set Up7. Rotate the antenna to the vertical position.Using A Synapse Cable1. Make sure all host devices are powered down.IMPORTANTBefore power is p

2-4P470/370 RF Scanner Product Reference Guide7. Connect the appropriate line cord to the power supply and into an AC receptacle.8. The indicator ligh

2-5Set Up3. Fasten the two screws provided into the wall where the cradle will hang, leaving about 1/8” (0.3 cm) of the screw outside the wall for the

2-6P470/370 RF Scanner Product Reference GuidePairing the Scanner with the CradleThe scanner and cradle must be paired for communication to occur.Note

2-7Set UpOptimizing RF PerformanceMountingThe RF scanner and cradle are equipped with a 2.4 GHz point-to-point radio that has an RF transmission range

2-8P470/370 RF Scanner Product Reference GuidePhaser-to-Phaser Co-ExistenceUp to three P470/370 scanners within listening range (100 feet) of each oth

2-9Set UpUsing the Cradle1. Set up the cradle as described in Setting Up the Cradle on page 2-1..Figure 2-7. Placing the Scanner into the Cradle2. In

P470/P370 RF ScannerProduct Reference Guide72-38495-03Revision CDecember 2003

2-10P470/370 RF Scanner Product Reference GuideCharge Status LED IndicationsThe LED indicator on the cradle uses flashing patterns to display the char

2-11Set Up2. Slide the battery toward the bottom of the scanner and then pull the bottom of the battery back and out of the scanner.Figure 2-9. Pulli

2-12P470/370 RF Scanner Product Reference Guide

3-1Chapter 3 OperationIntroductionThis chapter covers how to use the cordless Phaser scanner.Default ApplicationThe cordless scanner is shipped from

3-2P470/370 RF Scanner Product Reference GuideInitial PowerupAfter a few seconds, the System Banner is replaced by the system initialization screen.Af

3-3OperationWith keypad entry enabled (default setting out of the box), press the <ENTER> key after keying in data. During data entry, the <B

3-4P470/370 RF Scanner Product Reference GuideEliminating Repetitive ScanningTo eliminate repetitive scanning of identical items, you can enter a quan

3-5OperationCommunication ErrorsA communication error occurs when the scanner, cradle or host fails to properly communicate. When a communication erro

3-6P470/370 RF Scanner Product Reference GuideHost / Cradle Communication Errors3. If the host and cradle are not communicating properly, insure the c

3-7OperationSystem MenuThe system menu allows the user to set up the operation of the scanner, such as loading a new application, set the scanner’s RF

2© 2001-2003 by Symbol Technologies, Inc. All rights reserved.No part of this publication may be reproduced or used in any form, or by any electrical

3-8P470/370 RF Scanner Product Reference GuideSystem Setup OptionsSystem Setup allows you to configure the scanner’s basic settings such as setting an

3-9OperationApp. ControlApp. Control allows you to control your application, specifically, load new applications on your scanner, reset your default a

3-10P470/370 RF Scanner Product Reference Guide1. Set Default App Reinstalls the default application and returns all parameters to their factory setti

3-11Operation2. Enable AutoLoadAutoLoad App.-Enable-DisableEnables the automatic application download feature in the default application. This allows

3-12P470/370 RF Scanner Product Reference Guide3. System Code Updates the scanner operating system (Firmware). To enter this mode using the key pad, s

3-13Operation4. Base Station Code Updates the cradle’s operating system (Firmware). To enter this mode using the key pad, select this option on the sy

3-14P470/370 RF Scanner Product Reference GuideParameter ControlParameter Control allows you to control the scanner parameters such as Scan Parameters

3-15OperationVersion0. Scanner Version This option displays the version of firmware (operating system) run by the scanner. For example, the firmware v

3-16P470/370 RF Scanner Product Reference GuideReturn to App1. Cradle Version This option displays the version of firmware (operating system) run by t

3-17Operation123Scan123Scan is an intuitive Windows based utility that allows you to customize your scanner setup and generate Advanced Data Formattin

iiiContentsAbout This ManualIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-18P470/370 RF Scanner Product Reference GuideSuffix Values123Scan generated programming bar codes for two commonly used suffixes (Enter and Tab) hav

3-19Operation5/96/97/98/99/9RESET SCANNER

3-20P470/370 RF Scanner Product Reference GuideTo append a Tab* to the transmitted bar code data, scan all nine (9) ADF rule bar codes and then the Re

3-21Operation5/96/97/98/99/9RESET SCANNER

3-22P470/370 RF Scanner Product Reference GuideScanningThe scanner ships with the default application and default parameters and is ready-to-use right

3-23OperationRight WrongHold at an AngleDo not hold the scanner directly over the bar code. Laser light reflecting directly back into the scanner from

3-24P470/370 RF Scanner Product Reference GuideDecode ZoneFigure 3-3. P470/P370 1D Scanner - Decode Zone0 in.0 cm 5 in.12.7 cm 10 in.25.4 cm 15 i

3-25OperationFigure 3-4. P370 ALR Scanner - Decode Zone0 in.0 cm 35 in.88.9 cm 70 in.177.8 cm 105 in.266.7 cm 140 in.355.6 cm 175 in.444.5 cm 210 i

3-26P470/370 RF Scanner Product Reference GuideKeypad OperationInstead of scanning a bar code, you can enter the bar code data using the keypad on the

3-27Operationtransferred to the host yet. A high-pitched beep lets you know that the entry has been transferred to the host. To return to numeric mode

ivP470/370 RF Scanner Product Reference GuideBattery Charge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-28P470/370 RF Scanner Product Reference Guide

4-1Chapter 4 Maintenance And SpecificationsIntroductionThis chapter explains how to maintain your scanner and the specifications for it.Maintenance•

4-2P470/370 RF Scanner Product Reference GuideTroubleshootingRefer to Appendix D, Messages and Error Codes for additional troubleshooting information.

4-3Maintenance And SpecificationsScanned data is incorrectly displayed on the host.Scanner is not programmed to work with the host.Ensure the proper h

4-4P470/370 RF Scanner Product Reference GuideNote:If after performing these checks the symbol still does not scan, contact your distributor or call t

4-5Maintenance And SpecificationsTechnical SpecificationsTable 4-2. Technical SpecificationsItem DescriptionDecode Capability The RF scanner can be pr

4-6P470/370 RF Scanner Product Reference GuideDimensionsHeight 7.0 in. (17.8 cm)Width 9.2 in. (13.5 cm)Depth 3.5 in. (9.8 cm)Laser Classifications CDR

4-7Maintenance And SpecificationsCradle Pin-outsThe following table shows the pin-outs for COM1 on the cradle.Table 4-3. Pin-outsPin Cradle1 Reserved2

4-8P470/370 RF Scanner Product Reference GuideBeeper Indications / Default Application Error CodesTable 4-4 list beep sequence and their meanings for

4-9Maintenance And SpecificationsLong Lo/Long Hi tone Input error, incorrect bar code or “Cancel” scanned, wrong entry, incorrect bar code programming

vContentsRF Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-10P470/370 RF Scanner Product Reference Guide

5-1Chapter 5 Parameter MenusIntroductionThis chapter has the optional parameter bar codes necessary to program the RF scanner.Operational ParametersT

5-2P470/370 RF Scanner Product Reference GuideThe following table lists the defaults for all parameters. If you wish to change any option, scan the ap

5-3Parameter MenusUPC/EANUPC-A Enabled 5-28 UPC-E Enabled 5-28 UPC-E1 Disabled 5-28 EAN-8 Enabled 5-29 EAN-13 Enabled 5-29 Bookland EAN Disabled 5-30

5-4P470/370 RF Scanner Product Reference GuideCode 128Code 128 Enabled 5-44 UCC/EAN-128 Enabled 5-45 ISBT-128 Enabled 5-47 Code 39 Code 39 Enabled 5-4

5-5Parameter MenusConvert I 2 of 5 to EAN 13 Disabled 5-65 Discrete 2 of 5Discrete 2 of 5 Disabled 5-66 Set Length(s) for D 2 of 5 12 5-67 CodabarCoda

5-6P470/370 RF Scanner Product Reference GuideRS-232CRS-232 Parameters Standard 5-83 Baud Rate 9600 5-84 Parity None 5-85 Check Receive Errors Disable

5-7Parameter MenusSet Default ParameterScanning this bar code returns all parameters to the values listed in Table 5-1 (factory settings), but does no

5-8P470/370 RF Scanner Product Reference GuideCommunication ProtocolThe bar codes below set the communication protocol used by the Scan & Transmit

5-9Parameter MenusHost TypeRS-232C Host TypesMost RS-232C hosts work fine with the default settings, however, three RS-232C hosts are set up with thei

viP470/370 RF Scanner Product Reference GuideCode 39 Check Digit Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5-10P470/370 RF Scanner Product Reference GuideScan the appropriate bar code below to select an RS-232C Host Interface.*STANDARD RS-232CICL RS-232CNIX

5-11Parameter MenusCode ID Characters for RS232C Host TypesSelecting the ICL, Fujitsu, or Nixdorf RS-232C host interface enables the transmission of C

5-12P470/370 RF Scanner Product Reference GuideHost Response TimeoutThis parameter indicates how long the scanner will wait for a response from the cr

5-13Parameter MenusRF ChannelSelects the RF channel used for radio transmissions and reception. The channel ranges are nation dependent (see Appendix

5-14P470/370 RF Scanner Product Reference Guide5 RETRIES6 RETRIES7 RETRIES8 RETRIES

5-15Parameter MenusSleep TimeScan the bar code below to select how long the scanner will “stay awake” (not power down) in seconds after a trigger pull

5-16P470/370 RF Scanner Product Reference GuideDecimal SeparatorScan the appropriate bar code below to select what separator to display when you hit t

5-17Parameter MenusKey ClickScan the appropriate bar code below to select whether the keypad click is enabled or not. Choose ENABLE or DISABLE.*ENABLE

5-18P470/370 RF Scanner Product Reference GuideBeeper ToneScan the appropriate bar code below to select a decode beep frequency (tone). Choose LOW FRE

5-19Parameter MenusBeeper VolumeScan the appropriate bar code below to select a beeper volume. Choose LOW VOLUME, MEDIUM VOLUME, or HIGH VOLUME.LOW VO

viiContentsLong Range Scanning Bar Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-102Aim Mode

5-20P470/370 RF Scanner Product Reference GuidePower Detect BeepScan the appropriate barcode below to enable or disable the Power Detection Beep.POWER

5-21Parameter MenusBeep After Good DecodeScan the appropriate bar code below to select whether or not the scanner beeps after a good decode. If DO NOT

5-22P470/370 RF Scanner Product Reference GuideLaser On TimeThis parameter sets the maximum time decode processing continues during a scan attempt. It

5-23Parameter MenusTransmit “No Read” MessageScan the appropriate bar code below to select whether or not a “No Read” message is transmitted. When ena

5-24P470/370 RF Scanner Product Reference GuideLinear Code Type Security LevelThe scanner offers four levels of decode security for linear code types

5-25Parameter MenusLinear Code Type Security Level (Continued)Linear Security Level 3Code types other than the following must be successfully read twi

5-26P470/370 RF Scanner Product Reference GuideBi-directional RedundancyThis parameter is only valid when a Linear Code Type Security Level (see page

5-27Parameter MenusAutodiscriminate Response TimeThis parameter extends the length of time during which the scanner tries to detect which host it is c

5-28P470/370 RF Scanner Product Reference GuideEnable/Disable UPC-E/UPC-A/UPC-E1Scan the appropriate bar code below to enable or disable UPC-E or UPC-

5-29Parameter MenusEnable/Disable EAN-8/EAN-13Scan the appropriate bar code below to enable or disable EAN-8 or EAN-13.*ENABLE EAN-8DISABLE EAN-8*ENAB